Events
Thursday March 13, 2008
(all day)
Start: 05/02/2008 - 00:00
End: 03/04/2008 - 00:00
Delivering Product Development Solutions Workshop will be held in IMechE London on
5 February, 4 March & 3 April 2008.
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
End: 00:11
Start: 09/03/2008 - 00:11
End: 13/03/2008 - 00:11
The SPIE Smart Structures/NDE, the internationally recognized
forum for reporting state-of-the-art research and development in smart
structures, smart materials, nondestructive evaluation, and health
monitoring will be held in San Diego, California, USA on 9-13 March 2008
SPIE Smart Structures/NDE
Abstracts are due 28 August
SPIE Smart Structures/NDE
Abstracts are due 28 August
End: 00:00
Start: 10/03/2008 - 00:00
End: 13/03/2008 - 00:00
The 34th Annual Conference of the IEEE Industrial Electronics Society, IECON-2008 will be held in Orlando, Florida, USA on 10-13 November 2008.
IECON-2008
The deadline for regular papers (not in Special Sessions) is 1 March 2008
IECON-2008
The deadline for regular papers (not in Special Sessions) is 1 March 2008
Start: 09:00
Start: 13/03/2008 - 09:00
End: 14/03/2008 - 17:00
A two day workshop open to the members of the IPROMS NoE to be held in Senlis on 13 & 14 March 2008. The target is the completion of the Delphi, meaning the execution of the second round interview and the interpretation of the results. The issues of the workshop activities will contribute to the establishment of a common strategy/approach for the second-phase Industrial Delphi study covering PAC cluster research areas. During the workshop all the results will be compiled for distribution among the cluster for further evaluation.
Friday March 14, 2008
(all day)
Start: 05/02/2008 - 00:00
End: 03/04/2008 - 00:00
Delivering Product Development Solutions Workshop will be held in IMechE London on
5 February, 4 March & 3 April 2008.
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
End: 17:00
Start: 13/03/2008 - 09:00
End: 14/03/2008 - 17:00
A two day workshop open to the members of the IPROMS NoE to be held in Senlis on 13 & 14 March 2008. The target is the completion of the Delphi, meaning the execution of the second round interview and the interpretation of the results. The issues of the workshop activities will contribute to the establishment of a common strategy/approach for the second-phase Industrial Delphi study covering PAC cluster research areas. During the workshop all the results will be compiled for distribution among the cluster for further evaluation.
Saturday March 15, 2008
(all day)
Start: 05/02/2008 - 00:00
End: 03/04/2008 - 00:00
Delivering Product Development Solutions Workshop will be held in IMechE London on
5 February, 4 March & 3 April 2008.
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
Sunday March 16, 2008
(all day)
Start: 05/02/2008 - 00:00
End: 03/04/2008 - 00:00
Delivering Product Development Solutions Workshop will be held in IMechE London on
5 February, 4 March & 3 April 2008.
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
Monday March 17, 2008
(all day)
Start: 05/02/2008 - 00:00
End: 03/04/2008 - 00:00
Delivering Product Development Solutions Workshop will be held in IMechE London on
5 February, 4 March & 3 April 2008.
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
Tuesday March 18, 2008
(all day)
Start: 05/02/2008 - 00:00
End: 03/04/2008 - 00:00
Delivering Product Development Solutions Workshop will be held in IMechE London on
5 February, 4 March & 3 April 2008.
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
Wednesday March 19, 2008
(all day)
Start: 05/02/2008 - 00:00
End: 03/04/2008 - 00:00
Delivering Product Development Solutions Workshop will be held in IMechE London on
5 February, 4 March & 3 April 2008.
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
Start: 09:00
End: 17:29
A one day workshop open to all I*PROMS partners to be held in Naples on 19 March 2007 on “Mobile On-Demand Intelligent Monitoring Systems for Machining Operations”.
Thursday March 20, 2008
(all day)
Start: 05/02/2008 - 00:00
End: 03/04/2008 - 00:00
Delivering Product Development Solutions Workshop will be held in IMechE London on
5 February, 4 March & 3 April 2008.
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
Friday March 21, 2008
(all day)
Start: 05/02/2008 - 00:00
End: 03/04/2008 - 00:00
Delivering Product Development Solutions Workshop will be held in IMechE London on
5 February, 4 March & 3 April 2008.
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
Saturday March 22, 2008
(all day)
Start: 05/02/2008 - 00:00
End: 03/04/2008 - 00:00
Delivering Product Development Solutions Workshop will be held in IMechE London on
5 February, 4 March & 3 April 2008.
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
Sunday March 23, 2008
(all day)
Start: 05/02/2008 - 00:00
End: 03/04/2008 - 00:00
Delivering Product Development Solutions Workshop will be held in IMechE London on
5 February, 4 March & 3 April 2008.
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
Monday March 24, 2008
(all day)
Start: 05/02/2008 - 00:00
End: 03/04/2008 - 00:00
Delivering Product Development Solutions Workshop will be held in IMechE London on
5 February, 4 March & 3 April 2008.
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
Start: 00:00
Start: 24/03/2008 - 00:00
End: 28/03/2008 - 17:00
Virtual Enterprise and Dynamic Reconfiguration for Manufacturing Systems - Training Course
Laboratory for Virtual Enterprises
University of Minho
Competitiveness, innovativeness and sustainability are critical requirements in nowadays and future Manufacturing Systems. Dynamic Reconfigurability of the Manufacturing Systems is a sine qua non condition to meet these requirements. This motivates the new organizational approach: Virtual Enterprises, which is the main tool for achieving the highest levels of reconfiguration dynamics. Manufacturing Systems based on Virtual Enterprise is a new paradigm for the Future.
Laboratory for Virtual Enterprises
University of Minho
Competitiveness, innovativeness and sustainability are critical requirements in nowadays and future Manufacturing Systems. Dynamic Reconfigurability of the Manufacturing Systems is a sine qua non condition to meet these requirements. This motivates the new organizational approach: Virtual Enterprises, which is the main tool for achieving the highest levels of reconfiguration dynamics. Manufacturing Systems based on Virtual Enterprise is a new paradigm for the Future.
Tuesday March 25, 2008
(all day)
Start: 05/02/2008 - 00:00
End: 03/04/2008 - 00:00
Delivering Product Development Solutions Workshop will be held in IMechE London on
5 February, 4 March & 3 April 2008.
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
(all day)
Start: 24/03/2008 - 00:00
End: 28/03/2008 - 17:00
Virtual Enterprise and Dynamic Reconfiguration for Manufacturing Systems - Training Course
Laboratory for Virtual Enterprises
University of Minho
Competitiveness, innovativeness and sustainability are critical requirements in nowadays and future Manufacturing Systems. Dynamic Reconfigurability of the Manufacturing Systems is a sine qua non condition to meet these requirements. This motivates the new organizational approach: Virtual Enterprises, which is the main tool for achieving the highest levels of reconfiguration dynamics. Manufacturing Systems based on Virtual Enterprise is a new paradigm for the Future.
Laboratory for Virtual Enterprises
University of Minho
Competitiveness, innovativeness and sustainability are critical requirements in nowadays and future Manufacturing Systems. Dynamic Reconfigurability of the Manufacturing Systems is a sine qua non condition to meet these requirements. This motivates the new organizational approach: Virtual Enterprises, which is the main tool for achieving the highest levels of reconfiguration dynamics. Manufacturing Systems based on Virtual Enterprise is a new paradigm for the Future.
Wednesday March 26, 2008
(all day)
Start: 05/02/2008 - 00:00
End: 03/04/2008 - 00:00
Delivering Product Development Solutions Workshop will be held in IMechE London on
5 February, 4 March & 3 April 2008.
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
(all day)
Start: 24/03/2008 - 00:00
End: 28/03/2008 - 17:00
Virtual Enterprise and Dynamic Reconfiguration for Manufacturing Systems - Training Course
Laboratory for Virtual Enterprises
University of Minho
Competitiveness, innovativeness and sustainability are critical requirements in nowadays and future Manufacturing Systems. Dynamic Reconfigurability of the Manufacturing Systems is a sine qua non condition to meet these requirements. This motivates the new organizational approach: Virtual Enterprises, which is the main tool for achieving the highest levels of reconfiguration dynamics. Manufacturing Systems based on Virtual Enterprise is a new paradigm for the Future.
Laboratory for Virtual Enterprises
University of Minho
Competitiveness, innovativeness and sustainability are critical requirements in nowadays and future Manufacturing Systems. Dynamic Reconfigurability of the Manufacturing Systems is a sine qua non condition to meet these requirements. This motivates the new organizational approach: Virtual Enterprises, which is the main tool for achieving the highest levels of reconfiguration dynamics. Manufacturing Systems based on Virtual Enterprise is a new paradigm for the Future.
Thursday March 27, 2008
(all day)
Start: 05/02/2008 - 00:00
End: 03/04/2008 - 00:00
Delivering Product Development Solutions Workshop will be held in IMechE London on
5 February, 4 March & 3 April 2008.
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
(all day)
Start: 24/03/2008 - 00:00
End: 28/03/2008 - 17:00
Virtual Enterprise and Dynamic Reconfiguration for Manufacturing Systems - Training Course
Laboratory for Virtual Enterprises
University of Minho
Competitiveness, innovativeness and sustainability are critical requirements in nowadays and future Manufacturing Systems. Dynamic Reconfigurability of the Manufacturing Systems is a sine qua non condition to meet these requirements. This motivates the new organizational approach: Virtual Enterprises, which is the main tool for achieving the highest levels of reconfiguration dynamics. Manufacturing Systems based on Virtual Enterprise is a new paradigm for the Future.
Laboratory for Virtual Enterprises
University of Minho
Competitiveness, innovativeness and sustainability are critical requirements in nowadays and future Manufacturing Systems. Dynamic Reconfigurability of the Manufacturing Systems is a sine qua non condition to meet these requirements. This motivates the new organizational approach: Virtual Enterprises, which is the main tool for achieving the highest levels of reconfiguration dynamics. Manufacturing Systems based on Virtual Enterprise is a new paradigm for the Future.
Friday March 28, 2008
(all day)
Start: 05/02/2008 - 00:00
End: 03/04/2008 - 00:00
Delivering Product Development Solutions Workshop will be held in IMechE London on
5 February, 4 March & 3 April 2008.
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
End: 17:00
Start: 24/03/2008 - 00:00
End: 28/03/2008 - 17:00
Virtual Enterprise and Dynamic Reconfiguration for Manufacturing Systems - Training Course
Laboratory for Virtual Enterprises
University of Minho
Competitiveness, innovativeness and sustainability are critical requirements in nowadays and future Manufacturing Systems. Dynamic Reconfigurability of the Manufacturing Systems is a sine qua non condition to meet these requirements. This motivates the new organizational approach: Virtual Enterprises, which is the main tool for achieving the highest levels of reconfiguration dynamics. Manufacturing Systems based on Virtual Enterprise is a new paradigm for the Future.
Laboratory for Virtual Enterprises
University of Minho
Competitiveness, innovativeness and sustainability are critical requirements in nowadays and future Manufacturing Systems. Dynamic Reconfigurability of the Manufacturing Systems is a sine qua non condition to meet these requirements. This motivates the new organizational approach: Virtual Enterprises, which is the main tool for achieving the highest levels of reconfiguration dynamics. Manufacturing Systems based on Virtual Enterprise is a new paradigm for the Future.
Saturday March 29, 2008
(all day)
Start: 05/02/2008 - 00:00
End: 03/04/2008 - 00:00
Delivering Product Development Solutions Workshop will be held in IMechE London on
5 February, 4 March & 3 April 2008.
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
Sunday March 30, 2008
(all day)
Start: 05/02/2008 - 00:00
End: 03/04/2008 - 00:00
Delivering Product Development Solutions Workshop will be held in IMechE London on
5 February, 4 March & 3 April 2008.
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
Monday March 31, 2008
(all day)
Start: 05/02/2008 - 00:00
End: 03/04/2008 - 00:00
Delivering Product Development Solutions Workshop will be held in IMechE London on
5 February, 4 March & 3 April 2008.
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
Tuesday April 1, 2008
(all day)
Start: 05/02/2008 - 00:00
End: 03/04/2008 - 00:00
Delivering Product Development Solutions Workshop will be held in IMechE London on
5 February, 4 March & 3 April 2008.
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
Wednesday April 2, 2008
(all day)
Start: 05/02/2008 - 00:00
End: 03/04/2008 - 00:00
Delivering Product Development Solutions Workshop will be held in IMechE London on
5 February, 4 March & 3 April 2008.
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
Thursday April 3, 2008
End: 00:00
Start: 05/02/2008 - 00:00
End: 03/04/2008 - 00:00
Delivering Product Development Solutions Workshop will be held in IMechE London on
5 February, 4 March & 3 April 2008.
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
Delivering Product Development Solutions FEB Delivering Product Development Solutions MARCH Delivering Product Development Solutions APRIL
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
Friday April 4, 2008
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
Saturday April 5, 2008
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
Sunday April 6, 2008
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
Monday April 7, 2008
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
Start: 00:00
Start: 07/04/2008 - 00:00
End: 11/04/2008 - 00:00
The Photonics Innovation Village part of SPIE Europe Photonics Europe 2008 will take place in Strasbourg, France on 7-11 April 2008.
Download the Call for Proposals and apply by 15 November 2007: CFP
Showcase your projects and new applications and showcase Europe's finest research programs. Show your colleagues how you are overcoming the challenges and opportunities for new and emerging technologies.
Download the Call for Proposals and apply by 15 November 2007: CFP
Showcase your projects and new applications and showcase Europe's finest research programs. Show your colleagues how you are overcoming the challenges and opportunities for new and emerging technologies.
Tuesday April 8, 2008
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
(all day)
Start: 07/04/2008 - 00:00
End: 11/04/2008 - 00:00
The Photonics Innovation Village part of SPIE Europe Photonics Europe 2008 will take place in Strasbourg, France on 7-11 April 2008.
Download the Call for Proposals and apply by 15 November 2007: CFP
Showcase your projects and new applications and showcase Europe's finest research programs. Show your colleagues how you are overcoming the challenges and opportunities for new and emerging technologies.
Download the Call for Proposals and apply by 15 November 2007: CFP
Showcase your projects and new applications and showcase Europe's finest research programs. Show your colleagues how you are overcoming the challenges and opportunities for new and emerging technologies.
Start: 00:00
Start: 08/04/2008 - 00:00
End: 10/04/2008 - 00:00
IFAC Workshop on Navigation, Guidance, and Control of Underwater Vehicles will be held in Killaloe, Ireland on 8-10 April 2008.
NGCUV08
Extended Abstracts Deadline is 11th January 2008
NGCUV08
Extended Abstracts Deadline is 11th January 2008
Wednesday April 9, 2008
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
(all day)
Start: 07/04/2008 - 00:00
End: 11/04/2008 - 00:00
The Photonics Innovation Village part of SPIE Europe Photonics Europe 2008 will take place in Strasbourg, France on 7-11 April 2008.
Download the Call for Proposals and apply by 15 November 2007: CFP
Showcase your projects and new applications and showcase Europe's finest research programs. Show your colleagues how you are overcoming the challenges and opportunities for new and emerging technologies.
Download the Call for Proposals and apply by 15 November 2007: CFP
Showcase your projects and new applications and showcase Europe's finest research programs. Show your colleagues how you are overcoming the challenges and opportunities for new and emerging technologies.
(all day)
Start: 08/04/2008 - 00:00
End: 10/04/2008 - 00:00
IFAC Workshop on Navigation, Guidance, and Control of Underwater Vehicles will be held in Killaloe, Ireland on 8-10 April 2008.
NGCUV08
Extended Abstracts Deadline is 11th January 2008
NGCUV08
Extended Abstracts Deadline is 11th January 2008
Thursday April 10, 2008
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
(all day)
Start: 07/04/2008 - 00:00
End: 11/04/2008 - 00:00
The Photonics Innovation Village part of SPIE Europe Photonics Europe 2008 will take place in Strasbourg, France on 7-11 April 2008.
Download the Call for Proposals and apply by 15 November 2007: CFP
Showcase your projects and new applications and showcase Europe's finest research programs. Show your colleagues how you are overcoming the challenges and opportunities for new and emerging technologies.
Download the Call for Proposals and apply by 15 November 2007: CFP
Showcase your projects and new applications and showcase Europe's finest research programs. Show your colleagues how you are overcoming the challenges and opportunities for new and emerging technologies.
End: 00:00
Start: 08/04/2008 - 00:00
End: 10/04/2008 - 00:00
IFAC Workshop on Navigation, Guidance, and Control of Underwater Vehicles will be held in Killaloe, Ireland on 8-10 April 2008.
NGCUV08
Extended Abstracts Deadline is 11th January 2008
NGCUV08
Extended Abstracts Deadline is 11th January 2008
Friday April 11, 2008
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
End: 00:00
Start: 07/04/2008 - 00:00
End: 11/04/2008 - 00:00
The Photonics Innovation Village part of SPIE Europe Photonics Europe 2008 will take place in Strasbourg, France on 7-11 April 2008.
Download the Call for Proposals and apply by 15 November 2007: CFP
Showcase your projects and new applications and showcase Europe's finest research programs. Show your colleagues how you are overcoming the challenges and opportunities for new and emerging technologies.
Download the Call for Proposals and apply by 15 November 2007: CFP
Showcase your projects and new applications and showcase Europe's finest research programs. Show your colleagues how you are overcoming the challenges and opportunities for new and emerging technologies.
Saturday April 12, 2008
(all day)
Start: 06/02/2008 - 00:00
End: 13/05/2008 - 00:00
Lean Design® - Putting the Lean into Design Workshop will be held in IMechE, London
on 6 February and 13 May 2008
Lean Design Feb
Lean Design May
Lean Design Feb
Lean Design May
